How To Change Batteries In Oculus Controllers? (Ultimate Guide)

Oculus Rift controllers come with a built-in battery, which can last up to two hours. However, if you want to change the batteries, you’ll need to find a reliable source and do so carefully. Here are some tips on how to make this process easier:

Look for an authorized Oculus controller service. This will likely have better customer service and be more reliable in terms of switching batteries.

How to check the status of Batteries In Oculus Controllers?

How to check the status of Batteries In Oculus Controllers?

There is no one definitive way to determine the status of a battery in an Oculus controller. However, some simple methods can help you check for health and charge levels:

1. To test if the battery is fully charged, plug the controller into an outlet and wait for it to power up. If it doesn’t light up or give a sound, the battery is not yet full.

2. To test if the battery is healthy, hold the controller in one hand and plug it into an outlet with the other hand. The controller should remain connected even when its light goes out or there’s no sound from it.

3. To charge the battery, plug it into an outlet and wait until it lights up green. If there’s no sound or light from the battery, it has not been charged yet.

If for some reason your battery percentage is not appearing on the main menu bar, or you’re in disbelief about what the status of it really is, you can also check it through the menu options.

As you can see from the menu bar, there are two different battery percentages shown. The one on the right shows the battery percentage of your headset, and the one on the left shows the battery percentage of your controller.

they’ve been having a lot of fun playing with the new Oculus Go VR headset, but the battery life is terrible, and not just when you’re using it. The battery drains in a few hours just sitting there! Here’s how to get better battery life out of your Oculus Go.

they’ve spent quite a bit of time playing with the Oculus while having it plugged in, and since the Go doesn’t have full motion controls anyway, most of what you’re doing is sitting still and looking side to side a little.

How to change the Batteries In Oculus Controllers?

If you’re ever having trouble getting your Oculus controllers to work, it might be worth trying to change the batteries. Here’s how:

  1. Make sure that the controller is unplugged from the power outlet and remove any screws that may be holding it in place.
  2. Locate the two battery terminals on the controller and unscrew them both.
  3. Replace one of the batteries with a new one, and screw back on the old one’s terminal.
  4. Put everything back together and try again.

By the end of this piece, you will know the batteries you can use for your Oculus Quest 2 controllers and how to swap them once they’re out of juice.

Many users find it challenging to change the Oculus controller battery since they can’t locate the battery compartment. It’s usually hidden in the palm grip of the controllers.

That said, Oculus Quest 2 controllers run on the humble AA batteries used in nearly everything from wall clocks to grooming gadgets. Every controller features a single AA battery.

The “how to open oculus quest 2 controller battery” is a question that has been asked before. The answer for the question is found in this blog post, which will help you replace your Oculus Quest 2 controller’s battery.

What to prepare to change the Batteries In Oculus Controllers?

Oculus controllers use rechargeable battery cells to power the display and other devices. In order to change the batteries in your Oculus controllers, ensure that you have the correct tools and knowledge. Here are a few tips to help you prepare:

  • 1. Make sure you have access to a voltmeter and an ohm meter. This will allow you to measure how many amps each battery can handle before it needs to be replaced or recharged.
  • 2. Remove any protective film from the battery cells. This will make it easier to replace or recharge the batteries.
  • 3. Place one of the batteries in an observation position so that you can see how long it takes for it to charge back up.
  • 4. If replacing just one battery, be sure to choose an appropriate type of charger for your Oculus controller model.

So I changed the batteries in both of my Quest 2 controllers, and then when I tried to turn the headset on, my controllers wouldn’t connect. I tried changing back to the old batteries, no luck. I unpaired one of my controllers and I was going to re-pair it, but it wouldn’t pair. Now, if I try to go to the menu where you pair it, it doesn’t even let me. I click the button that says “Pair Oculus Quest 2 Right controller” in the Oculus app and it just does nothing.

Moreover, the Oculus wire is exceptional as it can balance the battery drain. And eventually, it’ll prevent the cables from draining the power and stop it from slowing until the internal batteries have died.

5 Tips for changing Batteries In Oculus Controllers

Oculus controllers come with a built-in battery, but if you ever want to change the batteries, there are a few tips to follow. Here are five tips for changing batteries in Oculus controllers:

  1. lines the battery connector so that it is facing out of the controller. This will make it easier to removal the battery if it needs to be replaced.
  2. place the new battery in the correct location and connect it to the controller using the pins on the old battery. Make sure there are no shorts or sparks when connecting these two pieces of hardware.

3)turn on your controller and wait until it starts up. Once it does, open up your Oculus app and go into Settings > Battery > Change Battery. Then select the new battery from among available options and hit OK.

Mines worn out mr knowitall. I left it off charge for months and now it takes all day to fully charge and runs out in 30-45 minutes. Thats just how all batteries work.

EDIT: I appreciate all the advice, I will definitely get it now. I have just had bad experiences with chargeable batteries before so I wanted to hear others opinions before purchasing.

Oculus unfortunately doesn’t sell spare parts and as far as I know there are no “licensed” repair shops, which is an artificial gatekeeping construct anyway to lock people out of repairing things with no strings attached.

If you’re anything like me, you’re probably always looking for ways to save money. So, when I saw that you could replace the batteries in your Oculus Quest 2 controllers, I was intrigued.

Overall, replacing the batteries in your Quest 2 controllers can save you money. Just make sure you keep the above points in mind before you start replacing batteries.

The short answer is yes, you can save money by replacing the batteries in your Quest 2 controllers. However, there are a few things you need to keep in mind before you start replacing batteries.

3 Warning on removing Batteries In Oculus Controllers

Oculus controllers are a popular product for gaming and other activity that require using a device with batteries. It is important to be aware of the 3 warning on removing batteries in oculus controllers. These include:

  1. The battery could catch fire if mishandled.
  2. The battery could explode if mishandled.
  3. The battery could become starved of moisture if not used regularly.

Most people, especially those not familiar with Oculus Quest 2, will have trouble finding the batteries compartment.

So, How to properly open the oculus quest 2 controller cover? How to change batteries in the oculus quest 2 controller? How do you charge them? Let us see everything in-detail.

The “how to open oculus quest 2 controller battery” is a question that has been asked many times. The answer to the question is that you need to open the battery compartment on the bottom of your Oculus Quest 2 controller and replace the old batteries with new ones.

The Oculus Quest 2 controllers are not rechargeable,  No built-in batteries are included with the controllers themselves.

There is no other way to power the Oculus Quest 2 controllers than with AA batteries. Therefore, unlike the headset, you cannot recharge these using a USB wire. However, a charging dock can be used to complete the task.

Here are some instructions on how to swap out the batteries in your Oculus Quest 2 accessories.

How long will the Batteries In Oculus Controllers take and last?

When it comes to VR, there are a lot of things that can go wrong. Even with the best of batteries, some users might not be able to enjoy virtual reality for long. However, Oculus is working on a new battery design that should help make VR experiences more bearable for longer. The updated battery should last up to 12 months and will also give users a longer time between charge cycles.

Designed for a long battery life and impressive performance, this set of 20 batteries will ensure your controllers are fully charged for a long time. These are not rechargable and are intended for a one-time use.

Oculus Quest 2 controllers will need charging at some point too. If you’ve been wondering how the fancy new controllers get their juice, then look no further. Not only are you alone – the future can get tricky even for many VR-enthusiasts, but in this article I’ll be talking about how to charge your Oculus Quest 2 Controllers.

All this may have you thinking about how often you’ll have to go through the hassle of charging the Oculus Quest 2 controllers.

How to prolong the lifetime of Batteries In Oculus Controllers?

When it comes to keeping your Oculus controllers working longer, there are a few things you can do. One is to keep them clean and free of dirt, dust, and other contaminants. Another is to charge them regularly.

(Keep in mind, the battery of the Oculus Quest 2 could run the risk of overheating when in use for longer than 2-3 hours.

This can also be avoided by turning off Auto Wake-Up. See further on how to do so.

At $129 USD, it is the most expensive accessory Oculus offers, but if you are looking for a great way to extend the battery life of a single session without interruption, this accessory justifies its heavy cost.

Because 2-3 hours of use in a single charge may be short to some, these tips will help users of the Oculus Quest 2 extend this time period for even longer. Be careful though, although the battery is durable, you may run the risk of overheating it and the device when extending its battery life beyond what is intended.

How to choose the best Batteries In Oculus Controllers?

Looking to buy an Oculus controller? Here are some tips to help you make the best choices. First, understand what battery types are available. There are three main types of batteries in the Oculus world – disposable, rechargeable and natural gas/propane. Here’s a look at what each type of battery can do:Disposable Batteries: These batteries come in dozens of different shapes and sizes.

They’re easy to find and use – just pop them into a charger and be ready to go. disposable batteries typically last around 10 hours when used regularly, but they’re good for short bursts of power.Rechargeable Batteries: These often have a longer lasting cycle time – up to 12 hours on a single charge! rechargeable batteries tend to be more expensive, but they offer better performance overall.

The Oculus line of controllers lasts quite a long time at best, with none of the Oculus controllers being anywhere near a low battery life. However, some Oculus controllers last a lot longer.

The Oculus controller, unlike a lot of other controllers, uses a single AA battery in each controller, and this battery lasts a decently long time before needing to have it replaced.

While it may not always be the simplest thing to have line up, making sure that you replace the batteries in both Oculus controllers at the same time is a good idea. This does not have a significant impact if you do not, but it makes it a lot more convenient to have the batteries in your controllers run out at the same time. This reduces the frequency of needing to stop playing your Oculus games to swap out a battery.

What’s the price of buying Batteries In Oculus Controllers?

The prices of batteries for Oculus controllers vary depending on the store, but typically they cost around $30 a pop. That’s not including the shipping cost. So it’s safe to say that buying batteries for your Oculus devices can be a little pricey. But if you’re looking to save money on your purchase, there are some great buys available online.

What is the Oculus Quest battery life? What are it’s specs? How long does it take to charge? What about the controllers? they answer all your questions here.

The controllers each use a single AA battery. These need to be replaced so it’s best you buy some rechargeable batteries.

One of the downsides of the Oculus Quest 2 is that it is abit front-heavy. The battery pack which goes on the back of the headset is to counterbalance this front-heavy weight and make the headset more comfortable – whilst increasing the battery life.

The controllers that come with the Quest and Quest 2 have a small eject icon molded into the plastic of each grip, roughly opposite the trigger button. That’s the battery compartment cover, and there’s a single AA battery hidden inside. The batteries that come with these controllers are alkaline, and you can’t recharge them.

Quest controllers aren’t rechargeable from the factory, but the officially licensed Anker Charging Dock makes charging your headset and controllers nearly effortless.

Where to purchase the cheap Batteries In Oculus Controllers?

If you’re looking to purchase cheap Oculus controllers, there a few good places to do so. Some of the best places to find these devices are online retailers, like Amazon, or in physical stores that sell gaming and entertainment hardware.

Also it depends on where you have purchased batteries from and how old they actually are. If you have bought and stuck a set of cheap ass dollar store batteries in there that will be at the end of their shelf life , you can expect them to not last long at all.

If you haven’t already, let’s try removing the batteries in the controllers for around 3-4 minutes to reset the wireless link, and re-pairing the controllers.

This. Once you go from 0 to 100% in seconds you understand why the controllers use batteries.

I’ve also noticed that the white light on the controllers seems to stay on even if I put the headset to sleep. Do the controllers not also go into a low-power mode? Or do they have their own delay before doing so? I have lots of AA batteries so I was OK with going through them but I didn’t expect it to be this fast.

Can’t imagine how it would be if I actually gamed actively on a regular basis.


if you are having problems with your Oculus controllers, it may be due to the battery. To change the batteries, first remove the cover from the controller. Next, unscrew the screws on the bottom of the controller. Finally, remove the old battery and place the new battery in. Once done, reattach the screws and put back the cover.